KB Access Solutions, LLC | 214-215-6283
All Rights Reserved - Designed by Beacon Grafix, Inc.
KB ACCESS SOLUTIONS, LLC 214-215-6283
KB ACCESS SOLUTIONS, LLC 214-215-6283
Home Home
Services Services
Products Products
  • Access Control
  • Gate Operators
  • Parking Control
  • Telephone Entry
  • Manufacturer Links
Contact Us Contact Us
Photos Photos
Home Home
Services Services
Products Products
Contact Us Contact Us
Photos Photos
1150 Overhead
1150 Overhead
1150 Overhead
6002 Light Duty
6002 Light Duty
6002 Light Duty
6050 / 6100
6050 / 6100
6050 / 6100
6300 Commercial
6300 Commercial
6300 Commercial
6400 Underground
6400 Underground
6400 Underground
9050 / 9070 Residential
9050 / 9070 Residential
9050 / 9070 Residential
9100 Commercial
9100 Commercial
9100 Commercial
9150 Commercial
9150 Commercial
9150 Commercial
GATE OPERATORS
92xx Slide Gate
92xx Slide Gate
92xx Slide Gate
9530, 9550
9530, 9550
9530, 9550
9310 Commercial
9310 Commercial
9310 Commercial
1150 OVERHEAD The 1150 overhead gate operator is designed to operate overhead type vehicular gates mounted on jamb track or jamb type hardware. Overhead gates are typically used in underground parking applications where headroom is minimal. The low profile design and quiet operation of the 1150 makes it ideal for these applications. ADVANCED FEATURES Direct driven limit nuts. Gate tracker reporting output. Ports for plug-in loop detectors. Fail-secure, keyed quick release. Shock mounts. Heavy-duty 3-inch rails. Programming switches. Built-in power On/Off switch. 6002 LIGHT DUTY The DKS swing gate actuator offers convenience and reliability in a compact design. The actuator mounts directly on your gate and pilaster, simplifying installation and eliminating the need for concrete pads. The elegant lines obtained by using extruded aluminum material provide a clean profile that will blend in with any gate design. But beauty is not just skin deep with the DKS actuator. The powerful screw driven piston connects directly to the gate eliminating weak mechanical connections and it is fully enclosed to prevent dirt and other airborne corrosives from contaminating the screw threads. And there is no need to worry about hydraulic leaks, check valves or pumps. These actuators feature built in limit switches that precisely control the start / stop speed, and travel of your gate. The microprocessor based electronic control board provides many advanced features typically not found in operators in this class, and is available in a standard and deluxe housing. The deluxe housing provides three 120 VAC convenience outlets to power additional auxiliary device transformers (for telephone entry systems, for example). Both come standard with built-in battery back-up installed. ADVANCED FEATURES Internal adjustable limit switches. Slow start / slow stop. Overlap feature for dual swing gate operation. Magnetic lock output. Ports for plug-in loop detectors. Fully enclosed screw drive. 120 VAC input power, 24 VDC operating power. Built-in battery back-up. Separate control panel. Keyed release for manual operation. 6050 / 6100 The Model 6050 and 6100 operators are designed to operate vehicular swing gates in residential and commercial applications. These operators are designed so that they can be either pad or post mounted without any costly and time consuming field modifications. You need to specify which mounting method when ordering. The unique design of these operators allows the gate arm to be attached to the bottom rail of the gate.This eliminates the need for any brackets to be welded to the face of the gate and creates an aesthetically pleasing installation. The 6100 can be equipped with a factory installed DC Convenience Open option which will automatically open the gate in the event of a power outage. ADVANCED FEATURES Self-adjusting, no maintenance magnetic limits. Overlap feature for dual swing gate operation. Designed with a built-in primary and secondary entrapment prevention system. Ports for plug-in loop detectors. Fail-safe release. Tamper detect circuit. DC Powered convenience open (Option on 6100 only). Gate tracker reporting output. Programming switches. Built-in reset switch. Built-in power On/Off switch. 6300 COMMERCIAL The 6300 series operators are designed to operate vehicular swing gates in residential, commercial and industrial applications. These operators are designed so that they can be either pad or post mounted without any costly and time consuming field modifications. You need to specify which mounting method when ordering. The unique design of these operators allows the gate arm to be attached to the bottom rail of the gate. This eliminates the need for any brackets to be welded to the face of the gate and creates an aesthetically pleasing installation. These operators can be equipped with a factory installed DC Convenience Open option which will automatically open the gate in the event of a power outage. ADVANCED FEATURES Self-adjusting, no maintenance magnetic limits. Overlap feature for dual swing gate operation. Designed with a built-in primary and secondary entrapment prevention system. Ports for plug-in loop detectors. Two convenience outlets. Fail-safe release. Tamper detect circuit. DC Powered convenience open (optional). Gate tracker reporting output. Programming switches. Built-in reset switch. Built-in power On/Off switch. 6400 UNDERGROUND THE MODEL 6400 installs underground making it virtually invisible and satisfies the most sophisticated automation needs without being detrimental to the original gate design. Invisible and powerful, the motor/drive mechanism is constructed in die-cast aluminum with a special corrosion-proof treatment, and because the drive unit is gear driven, there is no need to worry about hydraulic leaks, check valves or pumps. The underground self-supporting foundation box is built from corrosion-proof steel and has a galvanized steel cover. A lockable manual release lever is designed so that it can be operated from inside or outside the gate. The 6400 features built in limit switches that precisely control the start / stop speed, and travel of your gate. The microprocessor based electronic control board provides many advanced features typically not found in operators in this class, and with a 24 volt DC operating voltage, the 6400 is ideal for residential applications. ADVANCED FEATURES Internal adjustable limit switches. Slow start / slow stop. Overlap feature for dual swing gate operation. Magnetic lock output. Ports for plug-in loop detectors. 120 VAC input power. 24 VDC operating power. Built-in battery back-up. Separate control panel. Keyed release for manual operation. 9050 / 9070 RESIDENTIAL The Model 9050 and 9070 operators are designed to operate vehicular slide gates in residential and light-duty commercial applications only. These operators are designed so that they can easily be mounted in the front, center or rear of the gate without any costly and time consuming field modifications. In addition, the operators can be pad or post mounted to meet any installation requirements. ADVANCED FEATURES Self-adjusting, no maintenance magnetic limits. Ports for plug-in loop detectors. Two convenience outlets. Fail-safe release (fail-secure optional). Programming switches. Built-in reset switch. Built-in power On/Off switch. 9100 COMMERCIAL The Model 9100 operator is designed to operate vehicular slide gates in residential and commercial applications. The 9100 is designed so that it can easily be mounted in the front, center or rear of the gate without any costly and time consuming field modifications. In addition, the operator can be pad or post mounted to meet any installation requirements. ADVANCED FEATURES Self-adjusting, no maintenance magnetic limits. Partial-open feature. Anti-tailgating feature. Gate tracker reporting output. Ports for plug-in loop detectors. Two convenience outlets. Fail-safe release (fail-secure optional). Programming switches. Built-in reset switch. Built-in power On/Off switch. 9150 COMMERCIAL Model 9150 operators are designed to operate vehicular slide gates in residential, commercial and industrial applications. These operators are designed so that they can easily be mounted in the front, center or rear of the gate without any costly and time consuming field modifications. In addition, the operators can be pad or post mounted to meet any installation requirements. The 9150 can be equipped with a factory installed DC Convenience Open option which will automatically open the gate in the event of a power outage. ADVANCED FEATURES Self-adjusting, no maintenance magnetic limits. Partial-open feature. Anti-tailgating feature. Gate tracker reporting output. Ports for plug-in loop detectors. DC Powered Convenience Open (Optional). Two convenience outlets. Fail-safe release (fail-secure optional). Programming switches. Built-in reset switch. Built-in power On/Off switch. 92xx SLIDE GATE DoorKing's Maximum Security operators are designed to operate vehicular slide gates in limited (Class III) and restricted (Class IV) applications only. These operators should never be used in applications serving the general public. These operators are designed so that they can easily be mounted in the front, center or rear of the gate without any costly and time consuming field modifications. Center mounting the operator requires an optional pedestal mounting base. The speed control on the 9220 and 9230 models allows the user to set the speed of the gate from 1/2 to 2 feet/sec., and provides slow-start and slow-stop functions as well. ADVANCED FEATURES Direct driven limit nuts. Anti-tailgating feature. Adjustable mid-stop. Gate tracker reporting output. Ports for plug-in loop detectors. Two convenience outlets. Fail-secure operation includes crank for manual operation. Programming switches. Built-in reset switch. Built-in power On/Off switch. 9530, 9550 The model 9530 and 9550 operators are designed to operate very heavy vehicular slide gates in limited (Class III) and restricted (Class IV) applications only. These operators should never be used in applications serving the general public. These operators are designed so that they can easily be mounted in the front, center or rear of the gate without any costly and time consuming field modifications. These operators include a speed control module which allows the user to set the speed of the gate from 1/2 to 2 feet/sec. in the model 9530; and 1/2 tp 4 feet/sec in the model 9550. Each of these operators have a slow-start and slow-stop function as well. Additionally, a "Panic Close" input (model 9530 only) increases the gate speed up to 6 Ft./sec in the closing cycle. ADVANCED FEATURES Speed control module. Slow start / slow stop. Panic close (9530 only). Direct driven limit nuts. Anti-tailgating feature. Adjustable mid-stop. Gate tracker reporting output. Ports for plug-in loop detectors. Two convenience outlets. Fail-secure operation includes crank for manual operation. Programming switches. Built-in reset switch. Built-in power On/Off switch. 9310 COMMERCIAL The Model 9310 operator is designed to operate vehicular slide gates in residential and commercial applications. The 9310 is designed so that it can easily be mounted in the front or rear of the gate without any costly and time consuming field modifications. This operator is designed to be pad mounted. The 9310 is available in 1/2 or 1 HP versions and can be equipped with a factory installed DC Convenience Open option which will automatically open the gate in the event of a power outage. ADVANCED FEATURES Direct driven manual limits. Power Start circuit (1/2 HP only). Anti-tailgating feature. Gate tracker reporting output. Ports for plug-in loop detectors. DC Powered convenience open (optional). Two convenience outlets. Fail-safe release (fail-secure optional). Programming switches. Built-in reset switch. Built-in power On/Off switch. BACK TO TOP BACK TO TOP BACK TO TOP BACK TO TOP BACK TO TOP BACK TO TOP BACK TO TOP BACK TO TOP BACK TO TOP BACK TO TOP BACK TO TOP
1150 Overhead
1150 Overhead
1150 Overhead
6002 Light Duty
6002 Light Duty
6002 Light Duty
6050 / 6100
6050 / 6100
6050 / 6100
6300 Commercial
6300 Commercial
6300 Commercial
6400 Underground
6400 Underground
6400 Underground
9050 / 9070 Residential
9050 / 9070 Residential
9050 / 9070 Residential
9100 Commercial
9100 Commercial
9100 Commercial
9150 Commercial
9150 Commercial
9150 Commercial
GATE OPERATORS
92xx Slide Gate
92xx Slide Gate
92xx Slide Gate
9530, 9550
9530, 9550
9530, 9550
9310 Commercial
9310 Commercial
9310 Commercial
1150 OVERHEAD The 1150 overhead gate operator is designed to operate overhead type vehicular gates mounted on jamb track or jamb type hardware. Overhead gates are typically used in underground parking applications where headroom is minimal. The low profile design and quiet operation of the 1150 makes it ideal for these applications. ADVANCED FEATURES Direct driven limit nuts. Gate tracker reporting output. Ports for plug-in loop detectors. Fail-secure, keyed quick release. Shock mounts. Heavy-duty 3-inch rails. Programming switches. Built-in power On/Off switch. 6002 LIGHT DUTY The DKS swing gate actuator offers convenience and reliability in a compact design. The actuator mounts directly on your gate and pilaster, simplifying installation and eliminating the need for concrete pads. The elegant lines obtained by using extruded aluminum material provide a clean profile that will blend in with any gate design. But beauty is not just skin deep with the DKS actuator. The powerful screw driven piston connects directly to the gate eliminating weak mechanical connections and it is fully enclosed to prevent dirt and other airborne corrosives from contaminating the screw threads. And there is no need to worry about hydraulic leaks, check valves or pumps. These actuators feature built in limit switches that precisely control the start / stop speed, and travel of your gate. The microprocessor based electronic control board provides many advanced features typically not found in operators in this class, and is available in a standard and deluxe housing. The deluxe housing provides three 120 VAC convenience outlets to power additional auxiliary device transformers (for telephone entry systems, for example). Both come standard with built-in battery back-up installed. ADVANCED FEATURES Internal adjustable limit switches. Slow start / slow stop. Overlap feature for dual swing gate operation. Magnetic lock output. Ports for plug-in loop detectors. Fully enclosed screw drive. 120 VAC input power, 24 VDC operating power. Built-in battery back-up. Separate control panel. Keyed release for manual operation. 6050 / 6100 The Model 6050 and 6100 operators are designed to operate vehicular swing gates in residential and commercial applications. These operators are designed so that they can be either pad or post mounted without any costly and time consuming field modifications. You need to specify which mounting method when ordering. The unique design of these operators allows the gate arm to be attached to the bottom rail of the gate.This eliminates the need for any brackets to be welded to the face of the gate and creates an aesthetically pleasing installation. The 6100 can be equipped with a factory installed DC Convenience Open option which will automatically open the gate in the event of a power outage. ADVANCED FEATURES Self-adjusting, no maintenance magnetic limits. Overlap feature for dual swing gate operation. Designed with a built-in primary and secondary entrapment prevention system. Ports for plug-in loop detectors. Fail-safe release. Tamper detect circuit. DC Powered convenience open (Option on 6100 only). Gate tracker reporting output. Programming switches. Built-in reset switch. Built-in power On/Off switch. 6300 COMMERCIAL The 6300 series operators are designed to operate vehicular swing gates in residential, commercial and industrial applications. These operators are designed so that they can be either pad or post mounted without any costly and time consuming field modifications. You need to specify which mounting method when ordering. The unique design of these operators allows the gate arm to be attached to the bottom rail of the gate. This eliminates the need for any brackets to be welded to the face of the gate and creates an aesthetically pleasing installation. These operators can be equipped with a factory installed DC Convenience Open option which will automatically open the gate in the event of a power outage. ADVANCED FEATURES Self-adjusting, no maintenance magnetic limits. Overlap feature for dual swing gate operation. Designed with a built-in primary and secondary entrapment prevention system. Ports for plug-in loop detectors. Two convenience outlets. Fail-safe release. Tamper detect circuit. DC Powered convenience open (optional). Gate tracker reporting output. Programming switches. Built-in reset switch. Built-in power On/Off switch. 6400 UNDERGROUND THE MODEL 6400 installs underground making it virtually invisible and satisfies the most sophisticated automation needs without being detrimental to the original gate design. Invisible and powerful, the motor/drive mechanism is constructed in die-cast aluminum with a special corrosion-proof treatment, and because the drive unit is gear driven, there is no need to worry about hydraulic leaks, check valves or pumps. The underground self-supporting foundation box is built from corrosion-proof steel and has a galvanized steel cover. A lockable manual release lever is designed so that it can be operated from inside or outside the gate. The 6400 features built in limit switches that precisely control the start / stop speed, and travel of your gate. The microprocessor based electronic control board provides many advanced features typically not found in operators in this class, and with a 24 volt DC operating voltage, the 6400 is ideal for residential applications. ADVANCED FEATURES Internal adjustable limit switches. Slow start / slow stop. Overlap feature for dual swing gate operation. Magnetic lock output. Ports for plug-in loop detectors. 120 VAC input power. 24 VDC operating power. Built-in battery back-up. Separate control panel. Keyed release for manual operation. 9050 / 9070 RESIDENTIAL The Model 9050 and 9070 operators are designed to operate vehicular slide gates in residential and light-duty commercial applications only. These operators are designed so that they can easily be mounted in the front, center or rear of the gate without any costly and time consuming field modifications. In addition, the operators can be pad or post mounted to meet any installation requirements. ADVANCED FEATURES Self-adjusting, no maintenance magnetic limits. Ports for plug-in loop detectors. Two convenience outlets. Fail-safe release (fail-secure optional). Programming switches. Built-in reset switch. Built-in power On/Off switch. 9100 COMMERCIAL The Model 9100 operator is designed to operate vehicular slide gates in residential and commercial applications. The 9100 is designed so that it can easily be mounted in the front, center or rear of the gate without any costly and time consuming field modifications. In addition, the operator can be pad or post mounted to meet any installation requirements. ADVANCED FEATURES Self-adjusting, no maintenance magnetic limits. Partial-open feature. Anti-tailgating feature. Gate tracker reporting output. Ports for plug-in loop detectors. Two convenience outlets. Fail-safe release (fail-secure optional). Programming switches. Built-in reset switch. Built-in power On/Off switch. 9150 COMMERCIAL Model 9150 operators are designed to operate vehicular slide gates in residential, commercial and industrial applications. These operators are designed so that they can easily be mounted in the front, center or rear of the gate without any costly and time consuming field modifications. In addition, the operators can be pad or post mounted to meet any installation requirements. The 9150 can be equipped with a factory installed DC Convenience Open option which will automatically open the gate in the event of a power outage. ADVANCED FEATURES Self-adjusting, no maintenance magnetic limits. Partial-open feature. Anti-tailgating feature. Gate tracker reporting output. Ports for plug-in loop detectors. DC Powered Convenience Open (Optional). Two convenience outlets. Fail-safe release (fail-secure optional). Programming switches. Built-in reset switch. Built-in power On/Off switch. 92xx SLIDE GATE DoorKing's Maximum Security operators are designed to operate vehicular slide gates in limited (Class III) and restricted (Class IV) applications only. These operators should never be used in applications serving the general public. These operators are designed so that they can easily be mounted in the front, center or rear of the gate without any costly and time consuming field modifications. Center mounting the operator requires an optional pedestal mounting base. The speed control on the 9220 and 9230 models allows the user to set the speed of the gate from 1/2 to 2 feet/sec., and provides slow-start and slow-stop functions as well. ADVANCED FEATURES Direct driven limit nuts. Anti-tailgating feature. Adjustable mid-stop. Gate tracker reporting output. Ports for plug-in loop detectors. Two convenience outlets. Fail-secure operation includes crank for manual operation. Programming switches. Built-in reset switch. Built-in power On/Off switch. 9530, 9550 The model 9530 and 9550 operators are designed to operate very heavy vehicular slide gates in limited (Class III) and restricted (Class IV) applications only. These operators should never be used in applications serving the general public. These operators are designed so that they can easily be mounted in the front, center or rear of the gate without any costly and time consuming field modifications. These operators include a speed control module which allows the user to set the speed of the gate from 1/2 to 2 feet/sec. in the model 9530; and 1/2 tp 4 feet/sec in the model 9550. Each of these operators have a slow-start and slow-stop function as well. Additionally, a "Panic Close" input (model 9530 only) increases the gate speed up to 6 Ft./sec in the closing cycle. ADVANCED FEATURES Speed control module. Slow start / slow stop. Panic close (9530 only). Direct driven limit nuts. Anti-tailgating feature. Adjustable mid-stop. Gate tracker reporting output. Ports for plug-in loop detectors. Two convenience outlets. Fail-secure operation includes crank for manual operation. Programming switches. Built-in reset switch. Built-in power On/Off switch. 9310 COMMERCIAL The Model 9310 operator is designed to operate vehicular slide gates in residential and commercial applications. The 9310 is designed so that it can easily be mounted in the front or rear of the gate without any costly and time consuming field modifications. This operator is designed to be pad mounted. The 9310 is available in 1/2 or 1 HP versions and can be equipped with a factory installed DC Convenience Open option which will automatically open the gate in the event of a power outage. ADVANCED FEATURES Direct driven manual limits. Power Start circuit (1/2 HP only). Anti-tailgating feature. Gate tracker reporting output. Ports for plug-in loop detectors. DC Powered convenience open (optional). Two convenience outlets. Fail-safe release (fail-secure optional). Programming switches. Built-in reset switch. Built-in power On/Off switch. BACK TO TOP BACK TO TOP BACK TO TOP BACK TO TOP BACK TO TOP BACK TO TOP BACK TO TOP BACK TO TOP BACK TO TOP BACK TO TOP BACK TO TOP
214-215-6283
KB ACCESS SOLUTIONS, LLC 214-215-6283
214-215-6283
“Just Do The Right Thing”
SITE MENU SITE MENU
  • Home
  • Services
  • Products
  • Contact Us
  • Photos